S : Standart
O : Optional
-
Depth Capacity N wireline 2400 m Core Drill Rig Surface -
Type Diesel Model VOLVO PENTA TAD 843 VE TIER II Power 238 kW at 2200 rpm -
Flush Pump Capacity AMC 140 or 250 lt/min Feed Stroke 6 m pull mast with 3.5 m Hydraulic Feed Cylinder 200 kN pull BRADEN Hydraulic main hoist 180 kN single line "P" Capacity drillhead with 4 speed gear box, hydraulic chuck and gear transmission 1 set of N-WL jaws and bushings incl. Hydraulic Leveling Jack 4 (w/extendable legs) Single Large Diameter Crown Block Sheave S Hydraulic Mast Dump S Rod Holder, Gas Spring "P" size rod holder, gas spring (incl. N-WL size jaws) Skid Mounted S Hydraulic Circuit for Water Pump S Hydraulic Wireline Hoist S Fuel Tank 300 l Lightening Kit S Crawler Carrier O Rotation rpm and mud flow meter gauges S Drilling Angle 45° to 90° Color Code RAL 1028 CE Certificed S Patented Rod Elevator S -
Suitable Drilling Diameter 46-114 mm Core Drilling Exploration WL Drilling A,B,N,H and P sizes NW 1550 m B-WL 2750 m N-WL 2400 m H-WL 1550 m P-WL 1050 m The above figures only serve as a guideline and refer to vertical, downward drilling in homogeneous rock -
Spindle Inner Diameter 119 m 1st Speed 200 rpm - 6250 Nm 2nd Speed 420 rpm - 3100 Nm 3rd Speed 750 rpm - 1750 Nm 4th Speed 1300 rpm - 1000Nm Max Speed 1300 rpm Max Torque 6250 Nm Hydraulic Open, Spring Closed Automatic S Chuck Equipped Sets of jaws Chuck Axial Holding Force 180 kN Hydraulic off-hole shift and of the rotation S -
Feed Lenght 3500 mm Max Feed Force 100 kN Max Retract Force 200 kN Drilling Angle 45° to 90° Rod Pull Length (with main hoist) 6.10 m The Mast is Equipped with Patented Rod Elevator and Lower Mast Position Fine Adjustment System S The Positioning of the Mast is Made with Hydraulic Cylinder S -
Gas Spring Powered S Max Rod Size 117,5 mm Max. Inside Diameter without Covers 230 mm Max. Inside Diameter without Jaws 150 mm Axial Holding Force 200 kN Equipped with N-WL set jaws and guides Hydraulic open, Gas Spring Closed S -
Includes RPM Display of the Rotation Unit S Flow Rate of the Mud Pump S *Mounted on a Seperate Frame. It is Equipped with all Necessary Valves, Gauges and Switches to Control the Drilling Operations S -
Main Pump Flow - Max Working Pressure 300 l/min - 310 bar Service Pump Flow - Max Working Pressure 150 l/min - 250 bar Auxilary Pump Flow - Max Working Pressure 60 l/min - 220 bar Stainless Steel Oil Tank with Return Filters S Stainless Steel Fuel Tank Primary Fuel Filter with Water Seperator and Electric Transfer Pump S Hand Pump for Oil Filling S -
It is Mounted on the Rig Chassis and Equipped with all Necessary Pulleys etc. S Capacity 2600 m with 6 mm wire rope Line Pull (Bare Drum-Full Drum) 19 kN - 5.0 kN Line Speed (Bare Drum-Full Drum) 80 m/min - 320 m/min -
Single Line Capacity (Bare drum) 180 kN Line Speed (Bare drum) 30-70 m/min Cable Size 33 m x 24 mm -
AMC Triplex Pump Mounted on the Rig Chassis and Operated with Hydraulic Power from the Rig S Capacity 0-140 l/min (adjustable) Max Pressure 70 bar / 90 bar -
Digital Leveling Gauge O Boom Angle Display O Penetration Rate Display O Fuel Level in Tank O -
Radio Remote Control for Crawler with this Option Machine can be Driven without Anybody on the Machine. O The driver can Stand in a Safe Place or Walk Aside from the Machine -
With this option, the machine will be equipped with a hydraulic system that synchronizes the chuck and rod holder for automatic rod handling. Also, the control panel will be separate and movable around the rig and can be put into a tent, etc. O -
Driven by Power Pack ;
Track width
Track Length
Crawler Carrier Width
Travel SpeedO
400mm
3308 mm
-
1,01 km/h -
Air type Oil Cooler S Larger Capacity Water Pump O Cold (Arctic) Climate option (Special seal, fuel and air filters, etc.) O Mud Mixers O Custom Color O